Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · TurboChef · High-speed ovens

TurboChef Sota i1 Rapid Cook Ovens

Current and older. 7 model numbers in this series.

Schedule a Visit(844) 393-0816
01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • I1-9500-801
  • I1-9500-836
  • I1-9500-889
  • I1-9500-905
  • I1-9500-921
  • I1-9500-938
  • I1-9500-973

Repairs this series usually needs

  1. F1 blower not running
  2. F2 cook temperature low
  3. F5 and F6 cooling and airflow
  4. High-limit reset near the power cord

The Sota i1 is a TurboChef rapid cook oven with a touchscreen and Panini tray options. Models begin with I1-9500 followed by a three-digit suffix, such as 801 or 921. Older units carried the Sota or NGO names, and the Sota i1 stays in the list of ovens we see on service calls.

The owner steps in the manual cover the same four messages as on the i-series: F1 for the blower, F2 for low cook temperature, F5 for magnetron over temperature and F6 for the electrical compartment. First come the air nozzles, the rear fans and the high-limit reset near the power cord; the heater and the blower follow.

We repair these ovens at your location, and you see the price in writing before any work starts.

About this series

  • Rapid cook oven with Panini tray options
  • Touchscreen control
  • 208/240V single-phase supply on a NEMA 6-30 plug
  • Earlier names include Sota and NGO
→Codes

TurboChef high-speed ovens codes

F5TurboChef HhC Oven Error Code F5: Cook Cavity Too HotF7TurboChef HhC Oven Error Code F7: RTD FailureF8TurboChef HhC Oven Error Code F8: High Limit TrippedF9TurboChef HhC Oven Error Code F9: Belt Run FailureF1: Blower Running Status BadTurboChef High-Speed Oven Error Code F1: Blower Running Status BadF2: Cook Temperature Low (HhC: F2: Low Temp During Cook; C3: LOW COOK TEMP / F2 LOW TEMP)TurboChef High-Speed Oven Error Code F2: Cook Temperature LowF3: Magnetron Current Low (C3: LOW MAG CURR / F3 MAG CURR)TurboChef High-Speed Oven Error Code F3: Magnetron Current LowF4: Door Monitor Defective (C3: DOOR MONITOR / F4 MONITOR)TurboChef High-Speed Oven Error Code F4: Door Monitor DefectiveF5: Magnetron Over Temperature (C3: MAG OVER TMP / F5 MAG TEMP)TurboChef High-Speed Oven Error Code F5: Magnetron Over TemperatureF6: EC Temp (HhC: EC Over Temp; C3: ELEC OVR TMP / EC TEMP HIGH / F6 EC TEMP)TurboChef High-Speed Oven Error Code F6: Electrical Compartment HotFault Code: F8 Fault (listed with 'oven is not warming up properly')TurboChef High-Speed Oven Error Code F8: Oven Not Warming Up ProperlyHX RISE LOWTurboChef High-Speed Oven Message HX RISE LOW: Heater Not Rising
→Same maker

Other TurboChef high-speed ovens series

TurboChef Bullet Rapid Cook OvensCurrent lineENC-9600-801TurboChef C3 Convection Microwave OvensOlder lineC3/ABC3/CC3 MultiC3/C MultiTurboChef CIBO+ Rapid Cook OvensCurrent lineCBO-9500-1TurboChef ECO and ECO ST Rapid Cook OvensCurrent lineECO-9500-801ECO-9500-805ECS-9500-801ECS-9500-805ECO El BandidoECO ST El BandidoTurboChef Fire Artisan Pizza OvensCurrent lineFRE-9600-1FRE-9600-5FRE-9600-31TurboChef HhC 1618, 2020 and 2620 Conveyor OvensCurrent and olderHCS-9500-2CHCS-9500-2C-VHCS-9500-7CHCS-9500-7C-VHCT-9500-510-CHCT-9500-510-C-VHCT-9500-511-CHCT-9500-511-C-V+8 moreTurboChef High h Batch OvensCurrent and olderHHB-8601-1HHB-8601-1CHHB-8601-1DHHB-8601-1KHHD-9500-801HHD-9500-814-DLHHD-9500-877HHD-9500-878-DL+1 moreTurboChef i3 and i5 Rapid Cook OvensCurrent and olderI3-9500-801I3-9500-814-DLI5-9500-801-USI5-9500-814-DLI5-9500-1I5-9500-14-DLTurboChef PLEXOR M2 Multicook OvensCurrent linePLEXOR M2
FAQTurboChef Sota i1 Rapid Cook Ovens questions
What is the Panini option on an i1?

It is a tray option for pressing sandwiches. It does not change the service checks, which follow the same F-number list as the other i-series ovens.

Where is the high-limit reset on the i1?

The manual places it near the power cord on the rear wall. Press it only when the oven is cool, and call us if it trips again.

Do the I1 suffix numbers matter?

The last digits mark the version of the oven. The digits help us pack the correct parts, and we verify them again at the oven.

Book a visit

Book repair for your TurboChef Sota i1 Rapid Cook Ovens

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

(844) 393-0816
Open the booking form
☎ Call our office ▤ Schedule a Visit