Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · TurboChef · High-speed ovens

TurboChef ECO and ECO ST Rapid Cook Ovens

Current line. 6 model numbers in this series.

Schedule a Visit(844) 393-0816
01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • ECO-9500-801
  • ECO-9500-805
  • ECS-9500-801
  • ECS-9500-805
  • ECO El Bandido
  • ECO ST El Bandido

Repairs this series usually needs

  1. F1 blower not running
  2. F2 cook temperature low
  3. F6 electrical compartment too hot
  4. Airflow blocked at the sides

The ECO and the ECO ST are TurboChef ventless rapid cook ovens. The ECO uses a NEMA L6-20 plug and the ECO ST uses a NEMA 6-30 plug. Models read ECO-9500-801 or 805 for the ECO and ECS-9500-801 or 805 for the ECO ST. The El Bandido versions are the panini ovens in the same family.

The owner troubleshooting table lists the blower message F1, low cook temperature F2 and the electrical compartment message F6. We check the plug and breaker first, because the two plug types are easy to mix up on a shared circuit, then the nozzles, the fan guards and the blower.

These ovens have often run for years in sandwich shops. We repair them and say plainly when the cost is more than the oven is worth.

About this series

  • Ventless rapid cook oven
  • ECO uses a NEMA L6-20 plug and ECO ST uses a NEMA 6-30 plug
  • El Bandido panini versions
  • Troubleshooting table lists F1, F2 and F6
→Codes

TurboChef high-speed ovens codes

F5TurboChef HhC Oven Error Code F5: Cook Cavity Too HotF7TurboChef HhC Oven Error Code F7: RTD FailureF8TurboChef HhC Oven Error Code F8: High Limit TrippedF9TurboChef HhC Oven Error Code F9: Belt Run FailureF1: Blower Running Status BadTurboChef High-Speed Oven Error Code F1: Blower Running Status BadF2: Cook Temperature Low (HhC: F2: Low Temp During Cook; C3: LOW COOK TEMP / F2 LOW TEMP)TurboChef High-Speed Oven Error Code F2: Cook Temperature LowF3: Magnetron Current Low (C3: LOW MAG CURR / F3 MAG CURR)TurboChef High-Speed Oven Error Code F3: Magnetron Current LowF4: Door Monitor Defective (C3: DOOR MONITOR / F4 MONITOR)TurboChef High-Speed Oven Error Code F4: Door Monitor DefectiveF5: Magnetron Over Temperature (C3: MAG OVER TMP / F5 MAG TEMP)TurboChef High-Speed Oven Error Code F5: Magnetron Over TemperatureF6: EC Temp (HhC: EC Over Temp; C3: ELEC OVR TMP / EC TEMP HIGH / F6 EC TEMP)TurboChef High-Speed Oven Error Code F6: Electrical Compartment HotFault Code: F8 Fault (listed with 'oven is not warming up properly')TurboChef High-Speed Oven Error Code F8: Oven Not Warming Up ProperlyHX RISE LOWTurboChef High-Speed Oven Message HX RISE LOW: Heater Not Rising
→Same maker

Other TurboChef high-speed ovens series

TurboChef Bullet Rapid Cook OvensCurrent lineENC-9600-801TurboChef C3 Convection Microwave OvensOlder lineC3/ABC3/CC3 MultiC3/C MultiTurboChef CIBO+ Rapid Cook OvensCurrent lineCBO-9500-1TurboChef Fire Artisan Pizza OvensCurrent lineFRE-9600-1FRE-9600-5FRE-9600-31TurboChef HhC 1618, 2020 and 2620 Conveyor OvensCurrent and olderHCS-9500-2CHCS-9500-2C-VHCS-9500-7CHCS-9500-7C-VHCT-9500-510-CHCT-9500-510-C-VHCT-9500-511-CHCT-9500-511-C-V+8 moreTurboChef High h Batch OvensCurrent and olderHHB-8601-1HHB-8601-1CHHB-8601-1DHHB-8601-1KHHD-9500-801HHD-9500-814-DLHHD-9500-877HHD-9500-878-DL+1 moreTurboChef i3 and i5 Rapid Cook OvensCurrent and olderI3-9500-801I3-9500-814-DLI5-9500-801-USI5-9500-814-DLI5-9500-1I5-9500-14-DLTurboChef PLEXOR M2 Multicook OvensCurrent linePLEXOR M2TurboChef Sota i1 Rapid Cook OvensCurrent and olderI1-9500-801I1-9500-836I1-9500-889I1-9500-905I1-9500-921I1-9500-938I1-9500-973
FAQTurboChef ECO and ECO ST Rapid Cook Ovens questions
How do I know if I have an ECO or an ECO ST?

Look at the plug and the model. The ECO has the NEMA L6-20 plug and the ECO ST has the NEMA 6-30 plug. The model begins with ECO or ECS.

What does El Bandido mean on the label?

It marks the panini version of the oven. The service checks are the same as for the standard model, and we note the name on the label to bring the right parts.

Can I run an ECO on a shared circuit?

Ask an electrician about the plug type and the load, and do not share the circuit with other heavy equipment. A circuit that is overloaded can show up as odd blower or temperature messages.

Book a visit

Book repair for your TurboChef ECO and ECO ST Rapid Cook Ovens

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

(844) 393-0816
Open the booking form
☎ Call our office ▤ Schedule a Visit