Hobart Pot and Pan Washer Repair
We repair Hobart CPW80A and CPW100A pot and pan machines and the pot and pan cycle on the CL44e in Miami, Los Angeles, Houston, New York and San Diego. We check strainers and tank heat first, then give you the price in writing before work starts.
Common Hobart pot & pan washers problems
In plain words, the way kitchen and laundry staff describe them when they call.
Strainers clogged by heavy soil
Tank temperature stays low
Conveyor stops
Pots come out dirty
The CPW80A and CPW100A are pot and pan rack machines in Hobart’s older C-Line family, and many are still working daily in kitchens. The CL44e rack conveyor also has an NSF pot-and-pan cycle, so a kitchen with limited space can use one machine for dishes and cookware.
Heavy soil is what shortens the life of a pot and pan machine. Strainers and screens clog with food and grease, which lowers wash pressure and puts a load on the pump. We clean and inspect the strainers, the wash arms and the nozzles, and then check the tank. A tank that stays cool leads us to the heater or steam supply, the thermostat and the level probe. On the CL44e, the touchscreen shows tank monitor messages, and a tank probe message tells us the probe is not covered by water.
Kitchen humidity wears on wiring, switches and door seals. We say plainly when an older CPW machine is not worth repairing, give you a written price before work, and back our repair with a 30-day warranty on our work.
Pot & Pan Washer
Every maker we repair in this category, with general problems and care.
Open the categoryHobart pot & pan washers lines we service
Current and older lines with their model numbers.
Why is my Hobart pot washer not cleaning well?
Clogged strainers and wash nozzles are the usual cause, followed by low tank temperature. Clean the strainers when the machine is off and cool. If pots still come out dirty, call us.
Do you repair the Hobart CPW80A and CPW100A?
Yes. These older C-Line pot and pan machines are still in service, and we repair them. Give us the model and the problem, and we say honestly whether a repair is worth it.
Can my Hobart CL44e wash pots and pans?
The CL44e has an NSF pot-and-pan cycle. If that cycle does not clean well or the tank will not heat, call us and we test the pump, nozzles, strainers and heater.
Other Hobart equipment we repair
Hobart dish machines4 series · 15 codes→
Hobart glasswashersService and repair→
Hobart conveyor dish machines1 series→
Hobart booster heatersService and repair→
Hobart mixers6 series · 11 codes→
Hobart slicers3 series→
Hobart food processors3 series→
Hobart grinders2 series→Other pot & pan washers makers we repair
Book Hobart pot & pan washers repair
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.