Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Victory · Reach-in refrigerators

Victory RFS and RFSA Refrigerator-Freezer Reach-Ins

Current line. 10 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • RFS(A)-1D-S1-EW-HD-HC
  • RFS(A)-1D-S1-HD-HC
  • RFS(A)-2D-S1-EW-HC
  • RFS(A)-2D-S1-EW-HD-HC
  • RFS(A)-2D-S1-EW-PT-HC
  • RFS(A)-2D-S1-EW-PT-HD-HC
  • RFS(A)-2D-S1-HC
  • RFS(A)-2D-S1-HD-HC
  • RFS(A)-2D-S1-PT-HC
  • RFS(A)-2D-S1-PT-HD-HC

Repairs this series usually needs

  1. Freezer side warm while the refrigerator side is fine
  2. AH1 or AL1 alarms
  3. OPd door message
  4. Probe codes E1 to E5
  5. Frost on the coil

The RFS and RFSA are Victory dual-temperature reach-ins, with a refrigerator side and a freezer side in one cabinet. Numbers such as RFS(A)-1D-S1-HD-HC and RFS(A)-2D-S1-EW-HC are among the ten listed. The controller shows AH1, AL1 and OPd, with probe codes E1 to E5.

We check each side separately, since one can drift while the other is fine. Then we look at the gaskets, the airflow between the sides, the condenser and the fans. The probe codes name Pb1 to Pb5, so we test the one named before we replace anything.

Tell us which side is the problem and when it started, and we plan the visit around that. After a repair we test both sides again, so each holds its own temperature and neither borrows cold from the other.

About this series

  • Dual-temperature reach-ins
  • Controller with AH1, AL1, OPd and E1 to E5 alarms
  • Models such as RFS(A)-1D-S1-HD-HC
  • 10 model numbers
→Same maker

Other Victory reach-in refrigerators series

Victory ACRS Reach-In RefrigeratorsCurrent lineACRS-1D-S1-G-HCACRS-1D-S1-HCACRS-1D-S1-PT-HCACRS-1D-S1-PT-SD-HCVictory CBR Chef BasesCurrent lineCBR112HCCBR36HCCBR48HCCBR52HCCBR60HCCBR72HCCBR84HCCBR96HCVictory DRS and DRSA Dual-Temperature Reach-InsCurrent lineDRS(A)-2D-S1-HD-HCDRS(A)-2D-S1-LD-HCDRS(A)-2D-S1-PT-HD-HCDRS(A)-2D-S1-PT-LD-HCVictory HS, HSA, HIS and HISA Heated Holding CabinetsCurrent lineHIS(A)-1D-1HIS(A)-1D-1-PTHIS(A)-1D-1-PT-XHHIS(A)-1D-1-XHHIS(A)-2D-1HIS(A)-2D-1-PTHIS(A)-2D-1-PT-XHHIS(A)-2D-1-XH+17 moreVictory LSR Low-Profile RefrigeratorsCurrent lineLSR23HCLSR23HC-IQLSR27HCLSR27HC-IQLSR49HCLSR49HC-IQLSR72HCVictory Older VR and RS-S7 Reach-In Refrigerators2010 eraVR-1VR-2VR-3RS-1D-S7RS-2D-S7RS-3D-S7Victory RIS and RISA Roll-In RefrigeratorsCurrent lineRIS(A)-1D-S1-G-HCRIS(A)-1D-S1-HCRIS(A)-1D-S1-PT-G-HCRIS(A)-1D-S1-PT-HCRIS(A)-1D-S1-PT-XH-G-HCRIS(A)-1D-S1-PT-XH-HCRIS(A)-1D-S1-XH-G-HCRIS(A)-1D-S1-XH-HC+11 moreVictory RS and RSA Reach-In RefrigeratorsCurrent lineRS(A)-1D-S1-EW-G-HCRS(A)-1D-S1-EW-HCRS(A)-1D-S1-EW-HD-G-HCRS(A)-1D-S1-EW-HD-HCRS(A)-1D-S1-EW-PT-G-HCRS(A)-1D-S1-EW-PT-HCRS(A)-1D-S1-EW-PT-HD-GRS(A)-1D-S1-EW-PT-HD-HC+48 moreVictory VERSA Reach-In RefrigeratorsCurrent lineVERSA-1D-GD-HCVERSA-1D-HD-HCVERSA-1D-HG-HCVERSA-1D-SD-HCVERSA-2D-GD-HCVERSA-2D-HD-HCVERSA-2D-HG-HCVERSA-2D-SD-HC+4 moreVictory VPP and VPPD Pizza Prep TablesCurrent lineVPP119HCVPP46HCVPP60HCVPP67HCVPP72HCVPP93HCVPPD119HC-2VPPD119HC-3+21 moreVictory VSP and VSPD Sandwich and Salad Prep TablesCurrent lineVSP27HC-08VSP27HC-12BVSP36HC-10VSP36HC-15BVSP48HC-12VSP48HC-18BVSP60HC-16VSP60HC-24B+20 moreVictory VUR Undercounter RefrigeratorsCurrent lineVUR119HCVUR27HCVUR32HCVUR36HCVUR46HCVUR48HCVUR60HCVUR67HC+22 more
FAQVictory RFS and RFSA Refrigerator-Freezer Reach-Ins questions
Why is only the freezer side warm?

Each side has its own air path and probe. A frosted coil, a weak fan or a leaking gasket on one side warms just that side while the other stays normal.

What does AL1 mean on this cabinet?

AL1 says the temperature fell below the low alarm limit. A probe reading wrong or a changed set point can cause it, so we check both against a thermometer.

Can I set the two sides separately?

Yes. Each side has its own set point. We confirm both with a thermometer during the visit so the cabinet holds what you need on each side.

Book a visit

Book repair for your Victory RFS and RFSA Refrigerator-Freezer Reach-Ins

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit