Traulsen Refrigerator and Freezer Repair
We repair Traulsen G-Series and R-Series reach-ins, undercounters, chef bases and prep tables in Miami, Los Angeles, Houston, New York and San Diego, plus the older Traulsen R and A Series. Every job starts with a written price.
Traulsen equipment we work on
Pick yours: each page lists the problems, codes and model series for that kind of Traulsen equipment.
Common Traulsen problems we fix
In plain words, the way kitchen and laundry staff describe them when they call.
Hi CAb alarm on the display
Condenser clean alarm showing
Sensor error on the control
Evaporator iced and cabinet warm
Water overflowing from the condensate pan
Compressor will not start
Traulsen Lines and Models
Current Traulsen equipment starts with the G-Series reach-ins and pass-thrus (model numbers like G100 and G200) and the R-Series RHT, RLT, RRI and RIF cabinets. We also repair TU full-size and UHT and ULT compact undercounters, TS raised-rail prep tables, TE chef bases, UPT and UST compact prep tables and glycol-cooled prep tables. Traulsen R and A Series cabinets from before 2013 are still working in kitchens in all five metros, and we repair those as well.
The two control types behave differently. The G-Series has a tap-tap keypad control, while the R-Series and older A-Series use the Intela-Traul microprocessor control, and the display messages differ too. Identifying the control is the first thing we do.
What the Alarms Tell Us
A Hi CAb alarm means the cabinet has run too warm, because of an open door, hot product or a dirty condenser. The condenser clean alarm begins when discharge temperature passes about 140 degrees F, and the compressor and fan shut off at 160 until the system cools. Grease in a busy kitchen, plus humid heat in Miami and Houston or dry heat in Los Angeles and San Diego, brings a coil to that point quickly.
We look at the condenser, door gaskets and drain pan, then test the sensor in an ice bath, where a good one reads about 32,700 ohms at 32 degrees F. Hot-food models are not made to heat cold product, so we confirm what a cabinet is designed to do before diagnosing it. Older cabinets get a plain repair-or-replace talk and a written price.
Traulsen codes and alarms
What the display or the blinking light means, what is safe to check, and when to stop and call us.
Traulsen lines and model numbers we service
Current and older lines. Find the number on the data plate and open its series for the usual repairs.
G100G110G120XXG200G210G220XXG300G320+12 more→Traulsen Glycol-Cooled Prep TablesCurrent lineTB046SL2STB046SL3STB060SL2STB060SL3STB060FL4-1TB065SL2STB065SL3STB071SL2S+3 more→Traulsen R-Series RHT, RLT, RRI and RIF Reach-InsCurrent lineRHT126WUTRHT126WPUTRHT132DUTRHT132NUTRHT132NPUTRHT132WUTRHT132WPUTRHT226WUT+21 more→Traulsen TE Chef BasesCurrent lineTE036HTTE048HTTE060HTTE072HTTE084HTTE096HTTE110HT→Traulsen TS Raised-Rail Prep TablesCurrent lineTS048HTTS066HTTS072HTTS090HT→Traulsen TU Full-Size Undercounter Refrigerators and FreezersCurrent lineTU044HTTU072HTTU100HT→Traulsen UHT and ULT Compact UndercountersCurrent lineUHT27-DUHT32-DUHT48UHT60-DDUHT72-DDULT27ULT48ULT60+1 more→Traulsen UPT and UST Compact Prep TablesCurrent lineUPT276-DUPT279-DUPT3212UPT3212-DUPT4812UPT4818UPT6012UPT6012-DD+16 more→What does Hi CAb mean on my Traulsen?
Hi CAb is the cabinet high temperature alarm. A door held open, hot product or a dirty condenser can set it off. Close the doors and clear the condenser area, and call us if the alarm stays on.
Do you repair older Traulsen R and A Series cabinets?
Yes. Traulsen R and A Series reach-ins from before 2013 are still common, and we repair them. We tell you plainly when a repair no longer makes sense.
Why does my Traulsen show a condenser clean alarm?
The control sees a hot discharge line, which usually means a dirty condenser or filter. Cleaning it helps. If the alarm comes back, we check the fan and airflow.
Other makers we repair in these categories
Book Traulsen repair in Miami, Los Angeles, Houston, New York and San Diego
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.